Oil-water separators, is an important and much needed piece of equipment. There are many various types of oils and components that get combined. These need to get separated, and so there are different types of equipment both above and below ground that have been developed precisely for the job. It is important that the proper separator is chosen for the job as they each have their own place. Some people prefer one oil-water separator over another as some are looked upon as using an outdated technology or method. Let’s look at a few different types of separators and what they do:
On a boat, a marine oily water separator sometimes called an oily bilge water separator would be on hand to handle the filtration of the bilge water. Bilge water builds up and needs to be released every so often. As bilge water contains detergent, urine, oil, and other chemicals you want to filter out as much of this as you can before releasing out into the sea.
API oil-water separators have been designed by the standards set by the American Petroleum Institute (API). This device is meant to separate great amounts of oil and suspended solids from wastewater that comes from miscellaneous industrial sources, chemical plants, oil refineries, and petrochemical plants.
Using bioremediation with microorganisms to treat contaminated water is another option. With a painstakingly detailed environment for the microorganisms including hydrocarbons and nutrients such as oil or other particle contaminates and oxygen. This is used generally as one stage in a purification process using a plate separator to remove the bulk of the particle contaminates and was able to treat any of the pollutants at very low concentrations.
Crude oil separators filter out oil droplets from a waste stream, if there is an oil spillage.
Down hole oil-water separation technology is that where oil and gas is separated from the produced water at the bottom of a well. Then re-injects the majority of the produced water into another formation; which is generally deeper than the producing formation while the oil and gas rich stream is pumped to the surface. This technology removes solids from the disposal fluid, and minimizes contaminating drinking water.
A centrifugal water-oil separator, is used to separate oil and water by centrifugation. This contains a cylindrical container that rotates inside a larger container that is stationary. These types of oil-water separators are used for waste water processing and for cleanup of oil spills that are on a lake or sea. Centrifugal oil-water separators are also used for filtering diesel fuels and lubricating oils by removing the waste particles and impurities from them.
This equipment is essential to cleaning up the environment. Whether it is regular everyday up keep and maintenance, trying to prevent any disasters from occurring, or to stepping in when a situation unfortunately does occur. The main function of oil-water separators is to separate oil and water mixtures into their separate components, and they do a great job of it.